Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 5.001 SLD 3
THE CRANE GEOMETRY IS SIGNIFICANTLY IMPROVED DUE TO THE LINKAGE SYSTEM
- More power in the hook due to Single Link
- Maximum reliability due to PALTRONIC
- Shorter load cycle times due to High Speed Extention
- Maximum utilisation of the working range due to HPSC
Brochures
PK 5.001 SLD 1 | PK 5.001 SLD 3 | PK 5.501 SLD 5
| Max. lifting moment | 4.6 |
| Max. lifting capacity | 3300 |
| Max. hydraulic outreach | 11.1 |
| Max. manual outreach | 12.7 |
| Slewing angle | 400° |
| Slewing torque | 0.6 |
| Stabilizer spread (std) | 2.9 m |
| Fitting space required (std) | 0.66 |
| Width folded | 2.10 |
| Max. operating pressure | 330 |
| Pump capacity | 15 - 25 l/min |
| Dead weight (std.) | 695 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Std | 4.6 mt | 5.3 m | 400 | 0.6 | 33.0 Mpa | 15-25 | 695 kg | 1830 mm | 2100 mm | 660 mm | 5200 mm | - | 890 kg |
| A | 4.4 mt | 7.2 m | 400 | 0.6 | 33.0 Mpa | 15-25 | 765 kg | 1830 mm | 2100 mm | 660 mm | 7100 mm | - | 600 kg |
| B | 4.3 mt | 9.2 m | 400 | 0.6 | 33.0 Mpa | 15-25 | 830 kg | 1845 mm | 2100 mm | 660 mm | 9000 mm | - | 420 kg |
| C | 4.1 mt | 11.1 m | 400 | 0.6 | 33.0 Mpa | 15-25 | 890 kg | 1885 mm | 2115 mm | 660 mm | 11000 mm | - | 290 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
